Nissan Rogue Service Manual: Wiring diagram

ECU diagnosis information

A/C AUTO AMP. Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES DTC Inspection Priority Chart If some DTCs are displayed at the same time, perf ...

Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW CUSTOMER Interview the customer to obtain as much information as possible about the conditions and environ ...

Other materials:

Removal and installation
FRONT AIR CONTROL Removal and Installation REMOVAL Release the front air control clips and pawls using a suitable tool. : Metal clip : Pawl  Disconnect the harness connector from the front air control (1) and remove. INSTALLATION Installation is in the reverse order of ...

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE:  If DTC B1610 is displayed with DTC U1000, fi ...

ID registration cannot be completed
Description The ID of the tire pressure sensor installed in each wheel cannot be registered in the tire pressure monitoring system. Inspect the tire pressure sensor or the tire pressure monitoring system circuit. Diagnosis Procedure 1.CHECK TIRE PRESSURE SENSOR ACTIVATION TOOL Check tire pr ...