Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tools

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

KV10111100 (J-37228) Seal cutter

Removing oil pan (lower) etc.

Commercial Service Tools

Tool name

Description

Deep socket

Removing and installing oil pressure sensor 27 mm (1.06 in)
— (223-50000) Oil filter wrench assortment

Removing oil filter
— (16-5610) Oil pressure kit

Measuring oil pressure. Comes with adapter and hose. Designed to be used for both static and on road testing.
Tube presser

Pressing the tube of liquid gasket
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
DESCRIPTION Engine Lubrication System Camshaft (INT)  Chain tensioner Main gallery  Oil pan Oil cooler Balancer unit  Oil pan oil gallery Oil filter (with re ...

Other materials:

P0967 pressure control solenoid B
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0967 PC SOLENOID B (Pressure Control Solenoid B Control Circuit High) When all of the following conditions are satisfied and this state is main ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...

B terminal circuit
Description “B” terminal circuit supplies power to charge the battery and to operate the vehicles electrical system. Diagnosis Procedure Regarding Wiring Diagram information. Refer to CHG-7, "Wiring Diagram". 1.CHECK “B” TERMINAL CONNECTION  Turn ignition switch OFF. ...

© 2014-2024 Copyright www.nirogue.com