Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shapes of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

KV991J0070 (J-45695-A) Coolant refill tool

Refilling engine cooling system
— (J-48891) 14 mm spark plug socket

Removing and installing spark plug

Commercial Service Tool

Tool name

Description

Power tool

Loosening nuts, screws and bolts
— (223-50000) Oil filter wrench assortment

Removing oil filter
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Periodic maintenance
...

Other materials:

Stall test
Work Procedure INSPECTION  Check the engine oil level. Replenish if necessary. Refer to LU-7, "Inspection".  Check for leak of the CVT fluid. Refer to TM-190, "Inspection".  Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temp ...

Lumbar support switch
Exploded View Seat cushion outer finisher  Lumbar support switch Clip Pawl Removal and Installation REMOVAL  Using a suitable tool release clips and remove seat cushion outer finisher (1). : Clip Disconnect harness connector from lumbar support switch. ...

P0078 EVT control solenoid valve
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condit P0078 EX V/T ACT/CIRC-B1 (Exhaust valve control solenoid circuit bank 1) An improper voltage is sent to the ECM through exhaust valve timing co ...

© 2014-2025 Copyright www.nirogue.com