Nissan Rogue Service Manual: Basic inspection

Wiring diagram

TIRE PRESSURE MONITORING SYSTEM Wiring Diagram ...

Diagnosis and repair work flow

Work Flow NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and dis ...

Other materials:

Camshaft valve clearance
Camshaft valve clearance Perform this inspection as follows after removal, installation, or replacement of the camshaft or any valve parts, or if there are any unusual engine conditions due to changes in valve clearance over time (starting, idling, and/or noise).  Remove the ...

Normal operating condition
Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the engine speed is above 1,800 rpm under no load (for example, the selector lever position is neutral and engine speed is over 1,800 rpm) fuel will be cut off after some time. The exact time when the fuel is cut off varies b ...

Front manual seat adjustment (if so equipped)
Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the ...